Time-resolved laser-induced plasma spectrometry for determination of minor elements in steelmaking process samples

A pulsed Nd:YAG laser operating on the fourth (266 nm) and second (532 nm) harmonics has been used to generate plasmas on the target surface in air at atmospheric pressure. The influence of wavelength on quantitative analysis of 4 minor elements in stainless steel samples (Si, Ti, Nb and Mo) was investigated. Stainless steel samples with different elemental concentrations were prepared and analyzed by laser-induced plasma spectrometry (LIPS). The effect of laser wavelength on analytical figures of merit (calibration curves, correlation coefficients, linear dynamic ranges, analytical precision, and accuracy values) was found to be negligible when internal standardization (an Fe line) and time-resolved laser-induced plasma are employed. For both wavelengths, the calibration curves presented a good linearity and an acceptable linear dynamic range in the concentration interval investigated. For the four elements studied, limits of detection lower than 150 microg g(-1) were achieved. To evaluate the influence of wavelength on precision and accuracy, a set of fifteen high-alloyed steel samples from different stages of steelmaking process have been analyzed. Finally, the long-term stability of the analytical measurements for Mo with 532 nm wavelength has been discussed. RSD values were lower than 5.3% for the elements studied.     

Optimization of culture medium and conditions for penicillin acylase production by Streptomyces lavendulae ATCC 13664

The culture medium for Streptomyces lavendulae ATCC 13664 was optimized on a shake-flask scale by using a statistical factorial design for enhanced production of penicillin acylase. This extracellular enzyme recently has been reported to be a penicillin K acylase, presenting also high hydrolytic activity against penicillin V and other natural aliphatic penicillins such as penicillin K, penicillin F, and penicillin dihydroF. The factorial design indicated that the main factors that positively affect penicillin acylase production by S. lavendulae were the concentration of yeast extract and the presence of oligoelements in the fermentation medium, whereas the presence of olive oil in the medium had no effect on enzyme production. An initial concentration of 2.5% (w/v) yeast extract and 3 microg/mL of CuSO4 x 5H2O was found to be best for acylase production. In such optimized culture medium, fermentation of the microorganism yielded 289 IU/L of enzyme in 72 h when employing a volume medium/volume flask ratio of 0.4 and a 300-rpm shaking speed. The presence of copper, alone and in combination with other metals, stimulated biomass as well as penicillin acylase production. The time course of penicillin acylase production was also studied in the optimized medium and conditions. Enzyme production showed catabolite repression by different carbon sources such as glucose, lactose, citrate, glycerol, and glycine.     

Suppressed ion chromatography for monitoring chemical impurities in steam for geothermal power plants

A suppressed ion chromatography (IC) technique has been evaluated as a chemical monitoring tool for detecting major anions (F-, Cl-, NO3- and SO4(2-)) of condensed steam in geothermal power plants. It is shown that the suppressed IC technique provides a suitable means for preventing possible damage to generating equipment in the geothermal industry. An electrical conductivity detector (0.1 microS sensitivity) with an anion-exchange column (IonPac AS4A-SC), a micro-membrane suppressor (AMMS II), and an isocratic high-pressure pump system were successfully used for detecting low concentrations of inorganic anions. Method detection limits for the anions of interest were <0.184 mg/L. Details of the IC methodology as well as some experimental results obtained during its application for the chemical monitoring of geothermal steam pipes are also described.     

Conformational mobility of thianthrene-5-oxide

[reaction: see text] Data on the apparent dipole moment of thianthrene-5-oxide (1) and (1)H NMR spectra in different solvents support the conformational mobility of 1, which flaps between two limit boat conformations with the sulfinyl group in pseudoequatorial and pseudoaxial positions, respectively. The conformational equilibrium of 1 occurs too fast for the (1)H NMR (500 MHz) time-scale even at -130 degrees C, and the equilibrium constant has not been determined. The apparent dipole moments of 1 in n-hexane and 1,4-dioxane and the (1)H NMR spectra of 1 and the model compounds cis- and trans-thianthrene-5,10-dioxides (2) and thianthrene (5) in different solvents and at various temperatures confirm that the relative position of the conformational equilibrium of 1 is solvent-dependent, and more polar solvents favor the conformation with the sulfoxide group in the pseudoaxial position (1(')(ax)). Variable-temperature (1)H NMR spectra have established the interconversion barrier of trans-2 and confirmed that the conformational equilibrium of cis-2 is strongly displaced toward the conformation with both sulfinyl groups in the pseudoequatorial position. The (1)H NMR data support the transannular interaction of the functional groups in 1 and trans-2.     

Templating and selection in the formation of macrocycles containing [[P(micro-NtBu)(2)](micro-NH)](n) frameworks: observation of halide ion coordination

Amination of [ClP(micro-NtBu)](2) (1) using NH(3) in THF gives the cyclophospha(III)zane dimer [H(2)NP(micro-NtBu)](2) (2), in good yield. (31)P NMR spectroscopic studies of the reaction of 1 with 2 in THF/Et(3)N show that almost quantitative formation of the cyclic tetramer [[P(micro-NtBu)](2)(micro-NH)](4) (3) occurs. The remarkable selectivity of this reaction can (in part) be attributed to pre-organisation of 1 and 2, which prefer cis arrangements in the solid state and solution. The macrocycle 3 can be isolated in yields of 58-67 % using various reaction scales. The isolation of the major by-product of the reaction (ca. 0.5-1 % of samples of 3), the pentameric, host-guest complex [[P(micro-NtBu)(2)](2)(micro-NH)](5)(HCl).2 THF] (4.2 THF), gives a strong indication of the mechanism involved. In situ (31)P NMR spectroscopic studies support a stepwise condensation mechanism in which Cl(-) ions play an important role in templating and selection of 3 and 4. Amplification of the pentameric arrangement occurs in the presence of excess LiX (X=Cl, Br, I). In addition, the cyclisation reaction is solvent- and anion-dependent. The X-ray structures of 2 and 4.2 THF are reported.     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.     

Stereoselective Synthesis of Tetrahydrofuran Spiro‐β‐Lactams by Ru‐Catalyzed Metathesis of 7‐Oxabicyclo[2.2.1]heptenes

A new method for the synthesis of spiro‐β‐lactams tethered to tetrahydrofuran rings is described. The procedure is based on Ru‐catalyzed metathesis sequences with oxanorbornene precursors easily obtained by the Staudinger [2+2] cycloaddition of related imines.     

Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.     

Potential of zero total charge of platinum single crystals: A local approach to stepped surfaces vicinal to Pt(111)

The electrochemical behavior of platinum single-crystal electrodes is revisited, with special emphasis on the determination of the potential of zero charge. We show that the measure of the charge displaced during CO adsorption allows the determination of the potential of zero total charge (PZTC). The estimation of the potential of zero free charge (PZFC) is discussed, with different degrees of approximation. The application of this methodology to the study of the PZTC of platinum stepped surfaces vicinal to Pt(111) reveals a marked decrease of the PZTC due to the introduction of surface steps. This effect is interpreted as the result of the existence of markedly smaller surface potentials localized on step sites. The importance of considering local aspects of the interface is emphasized with the use of N₂O reduction as a sensitive probe to the local structure of the surface. It is proposed that the different local maxima observed in the absolute value of the reduction current correspond to the local values of PZTC. It is shown that there is, in general, good agreement between the overall PZTC, obtained from the CO displacement, and that calculated from the local values inferred from the N₂O reduction. Further insight is obtained with the application of the laser-induced temperature jump method. This technique is useful to calculate the potential of maximum entropy of the double-layer formation. The resulting value of this potential for Pt(111) is discussed in the light of the PZFC value obtained from different approaches. For stepped surfaces vicinal to Pt(111), two local maxima in the entropy of the double layer are observed that are close to the local PZTC values estimated from the N₂O reduction. This result suggests the existence of cooperative effects in the organization of the water dipoles close to the electrode surface. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 11, pp. 1275–1292. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

Room-temperature liquid phosphorimetry of the aluminium-ferron chelate in micellar media : Determination of aluminium

Aluminium reacts with 7-iodo-8-quinolinol-5-sulphonic acid (Ferron) in cetyltrimethylammonium bromide (CTAB) micelles to form a highly phosphorescent complex at room temperature. Suitable experimental conditions and the phosphorescent characteristics of the complex are described. Comparison with the results obtained for the phosphorescent niobium-Ferron complex in CTAB micelles helps to elucidate the mechanism of this type of phosphorescence. For aluminium the detection limit is 5.4 ng ml^?1; the relative standard deviation is 4.5% for 20 μg Al. The method is applied to aluminium determination in waters and dialysis fluids.